-
About usJianguo Waterproofing (Jianguo Weiye) was founded in 1989. It is a professional waterproofing enterprise integrating scientific research, production, sales, construction, and technical services.
-
BlogJianguo Waterproofing (Jianguo Weiye) was founded in 1989. It is a professional waterproofing enterprise integrating scientific research, production, sales, construction, and technical services.
-
ServiceJianguo Waterproofing (Jianguo Weiye) was founded in 1989. It is a professional waterproofing enterprise integrating scientific research, production, sales, construction, and technical services.
-
Social ResponsibilityJianguo Waterproofing (Jianguo Weiye) was founded in 1989. It is a professional waterproofing enterprise integrating scientific research, production, sales, construction, and technical services.
-
Contact UsJianguo Waterproofing (Jianguo Weiye) was founded in 1989. It is a professional waterproofing enterprise integrating scientific research, production, sales, construction, and technical services.
Share
National Day renovation 12 grout
Still deciding? If you are interested, you need to get a sample first,Contact us!
Product Category
Tag
- Product details
-
This is a new type of indoor tile grouting product that uses polyurea as its main raw material. It boasts excellent wear resistance and flexibility, vibrant colors, and superior weather resistance and UV protection. It can be used for extended periods in harsh indoor and outdoor environments (-50℃~100℃). It effectively solves the problems of dust accumulation, mildew growth, pollution, and discoloration in indoor gaps, providing convenience for a clean and safe indoor environment.
Execution Standard
GB 18583-2008 "Limits on Hazardous Substances in Adhesives for Interior Decoration and Renovation Materials"
Product Features
Yellowing Resistant/Crack Resistant/Low VOC
Scope of Application
Suitable for waterproofing, mildew proofing, and grouting of various indoor wall tiles and floor tiles, as well as edge decoration of floor yin and yang corners.
Construction Points
1. Cleaning of Gaps and Surface: Use tools such as a cleaning cone or scraper to pre-clean oil stains, loose materials, and other contaminants from the gaps and sweep with a brush to ensure that the tile gaps and surrounding areas are clean, dry, and free of dust, particles, oil stains, and loose materials;
2. Material Preparation and Installation: Cut the professional mixing tube with a utility knife according to the gap width. Before installing the mixing tube, use a glue gun to squeeze the tube until both A and B components are dispensed from the outlet. Then install the cut mixing tube to the outlet and use a high-quality, labor-saving grouting gun. To ensure the grouting agent is evenly mixed, squeeze out and discard the first 20-40cm of product from the mixing tube before proceeding with the subsequent grouting work;
3. Gap Filling: It is recommended to wax or tape the edges of the gap before filling to protect them. When filling, hold the mixing tube at a 45° angle to the tile surface so that the grouting agent can fill the gap. Slowly and evenly apply the material to the gap, controlling the force and frequency, and move the mixing tube evenly backward to ensure that the tile gap is filled evenly and fully;
4. Joint Pressing: To ensure that the grouting agent is fully filled and forms a moderate arc after curing, use a special joint pressing steel ball or trowel to evenly apply force along the tile gap from one end to the other;
5. Cleaning: The grouting agent begins to harden on the surface after mixing for 1 hour, and the masking tape can be removed or the semi-cured grouting agent on the tile surface can be cleaned with a cleaning scraper 2-3 hours after grouting.
Precautions
1. The grouting agent cures quickly, with an operation time of about 30 minutes. It is recommended that at least two people work together;
2. The ambient temperature during construction should be between 5℃ and 35℃. If the ambient temperature is below 5℃, soak the grouting agent in a grouting heating bag for 10 minutes before preheating before proceeding to the next step;
3. To ensure that the product is evenly mixed, each batch of grouting agent must use a new mixing tube, discard 20-40cm of product before proceeding to the next step, and do not use a used mixing tube directly;
4. Joint pressing must be completed within 30 minutes after filling, and within 10 minutes in high summer temperatures;
5. Unused product after opening should have its mixer removed and the lid sealed and stored within 15 minutes;
6. This grouting material has strong adhesion. It is recommended to wax or tape the tiles before grouting.
Transportation and Storage
Store in a cool, dry place. Take insulation measures below 5℃. The shelf life of unopened products is 12 months under normal storage conditions of 5℃~35℃.
Product Inquiry
* Note: Please leave your contact information, our professionals will contact you as soon as possible!
ADD：5th Floor, Building C, Chang'an New City Commercial Center, Dacheng Nanli, Fengtai District, Beijing
Jianguo WeChat Official Account