Jian Guo An Zhu 44 Cement-based Grouting Agent
+
  • Jian Guo An Zhu 44 Cement-based Grouting Agent

Share

Jian Guo An Zhu 44 Cement-based Grouting Agent

Made with a special formula, it can meet the requirements of repairing and sealing the defects of the base layer; improve the strength and hardness of the concrete cement base layer, achieve good bonding effect between the cement concrete base layer and the waterproof layer, ensure the quality and reliability of the waterproof layer and waterproof system, and has the super-era functional requirements of waterproof materials that can have the same lifespan as the building.

Still deciding? If you are interested, you need to get a sample first,Contact us!

Product Category

Tag

  • Product details
  • Made with a special formula, it can meet the requirements of repairing and sealing substrate defects; improving the strength and hardness of the concrete cement substrate, achieving good bonding between the cement concrete substrate and the waterproof layer, ensuring the quality and reliability of the waterproof layer and waterproof system, and possessing ultra-modern functional requirements that can last the lifetime of the building. This is a waterproof material.

    Execution Standard

    Execution Standard and Index: Q/FSWJG0051-2024

    Product Features

    Reinforce and solidify the cement concrete substrate, improve the strength and hardness of the concrete cement substrate, repair and seal substrate defects, improve substrate quality, meet the requirements of the waterproof layer construction for the substrate, improve the bonding strength and effect between the cement concrete substrate and the waterproof layer, and ensure the quality and reliability of the waterproof layer and waterproof system.

    Serial Number
    Item
    Index
    1
    Abrasion Resistance/mm
    ≤0.20
    2
    Surface Hardness/mm
    ≤4.5
    3
    24-hour Surface Water Absorption/mm
    ≤5.0
    Scope of Application

    Suitable for repairing and solidifying strengthening treatment of concrete cement substrates that are not firm and in poor condition.

    Construction Points

    1. Substrate Treatment: All substrate surfaces should be clean, stable, free of oil stains, wax stains, concrete curing agents, and other loose materials.

    2. For loose substrate interface treatment: No water needs to be added, ready to use directly from the bucket. Use a roller or brush to evenly apply 1-2 coats to the loose substrate. Spray application can also be used. Allow it to dry completely before proceeding to the next step. (If the substrate condition is good, there is no obvious powdering or it is a relatively dense substrate, it needs to be mixed with water at a ratio of 1:1 for construction).

    Precautions

    1. The temperature during construction should be between 5℃ and 35℃;

    2. Sedimentation and stratification during storage are normal phenomena. Stir well before use;

    3. Not suitable for substrates with very low strength of more than 5mm, avoid insufficient penetration depth leading to failure to strengthen.

    4. Unused material after opening should be sealed and stored;

    5. This product may cause skin allergies. Protective measures should be taken during use;

    6. If it gets into the eyes, rinse immediately with clean water. If any discomfort occurs, seek medical attention immediately.

    Transportation and Storage

    1. The product should be protected from damage during transportation. When storing the product, it should be kept ventilated, protected from freezing, and protected from direct sunlight. The storage temperature should not be lower than 5℃.

    2. Under normal transportation and storage conditions, the shelf life is 12 months from the date of production.

Product Inquiry

* Note: Please leave your contact information, our professionals will contact you as soon as possible!